Batholith load test is the best method to determine the bearing capacity of foundation at present, but because the bearing capacity of mudstone is relatively high, the rock foundation load test in engineering site is not only time-consuming and labor-intensive, but also can be used to determine the bearing capacity of foundation, the ultimate bearing capacity of the foundation can not be obtained precisely because of the range of the jack or other reasons.

Lin Zhong. Analysis of bearing capacity of sand-mudstone interbedded foundation under geometrical factors. Academic Journal of Architecture and Geotechnical Engineering (2023) Vol. 5, Issue 4: 64-69. https://doi.org/10.25236/AJAGE.2023.050410.

[1] Ma Furong. Failure modes and bearing characteristics of soft-hard interbedded argillaceous rocks in the Nanning Basin [D]. Guangxi University, 2018.

[2] Zhou Yong, Wang Xuri, Zhu Yanpeng, etc. Comparison and analysis of high slope monitoring and numerical simulation of mudstone-sandstone interbedded rock [J]. Acta Lanzhou University of Technology, 2018, 44(01): 109-115.

[3] Dong Jinyu, Yang Jihong, Wu faquan, etc. Study on high cut slope collapse of near horizontal stratum in soft-hard interbedded strata in three gorges reservoir area [J]. Geotechnical mechanics, 2010(01): 155-161.

[4] He Chunmei. Study on mechanical behavior of argillaceous soft rock under cyclic dynamic load and dynamic stability of soft-hard interbedded slope in reservoir area [D]. 2018.

[5] Liang B, Zhang S, Li D, et al. Safety Risk Evaluation of Construction Site Based on Unascertained Measure and Analytic Hierarchy Process[J]. Discrete Dynamics in Nature and Society, 2021.

[6] Cao Yungang. Experimental study on shear parameters of rock discontinuities [D]. Chongqing Jiaotong University, 2013.

[7] Ministry of Housing and Urban-Rural Development of the People's Republic of China. Standard for test method of engineering rock mass [S]. Beijing: China Planning Press, 2013.