The autotransplantation of teeth has been recognized in clinical practice as a proven method of restoring missing teeth. In patients with tooth loss, the socket must be created artificially by surgical means. In order to increase the success of the procedure, the preparation of the artificial socket is increasingly important, but the precise preparation of the socket often requires multiple surgical operations, which may prolong the procedure and affect the prognosis of the autologous dental implant.In recent years, digital technology has been innovated, and the use of computer-aided surgical simulation (CASS) in autodontic transplantation is becoming more and more frequent. The application of digital guides in the preparation of artificial alveolar sockets not only improves surgical precision but also shortens the surgical time and simplifies the procedure, making autodontic transplantation a controllable technique.

Muladili Maihemuti, Wang Ling. New trends in the preparation of artificial alveolar sockets in tooth autotransplantation. Academic Journal of Medicine & Health Sciences (2023) Vol. 4, Issue 11: 116-120. https://doi.org/10.25236/AJMHS.2023.041116.

[1] Hou R, Introduction to autologous tooth transplantation[J]. Chinese Journal of Practical Stomatology. 2013, 6 (08), 449-452.

[2] Chinese expert consensus on standardized operating procedures for autologous tooth transplantation [J]. Chinese Journal of Oral and Maxillofacial Surgery 2020, 18 (05), 390-394.

[3] Tsukiboshi, M., Autotransplantation of teeth: requirements for predictable success[J]. Dental traumatology: official publication of International Association for Dental Traumatology 2002, 18 (4), 157-80.

[4] Reyisha Abdukeimu, Jiang Chunyan, Elimerdan Ainwar, et al. A preliminary study of autologous tooth transplantation in three different periodontal sockets[J]. Oral Medicine Research, 2021, 37(3):5.

[5] CHEN Jiamin, WU Ye, HE Lianting, et al. Computerized virtual design assisted accurate preparation of alveolar sockets for autogenous dental implants[J]. Shanghai Stomatology, 2020, 29(1):4.

[6] Shahbazian M, Jacobs R, Wyatt J, et al. Validation of the cone beam computed tomography–based stereolithographic surgical guide aiding autotransplantation of teeth: clinical case–control study[J]. Oral Surgery Oral Medicine Oral Pathology & Oral Radiology, 2013, 115(5):667-675.

[7] Anssari Moin D, Verweij J P, Waars H, et al. Accuracy of Computer-Assisted Template-Guided Autotransplantation of Teeth With Custom Three-Dimensional Designed/Printed Surgical Tooling: A Cadaveric Study.[J]. J Oral Maxillofac Surg, 2017:S0278239117300022.

[8] Tsukiboshi M, Andreasen J O, Asai Y. Autotransplantation of teeth[M]. Quintessence Publishing (IL), 2001.

[9] Tsukiboshi M. Autotransplantation of teeth: requirements for predictable success [J]. Dental Traumatol, 2002, 18(4): 157-180.

[10] Meda R G, Sans F A, Esquivel J, et al. Impacted Maxillary Canine with Curved Apex: Three-Dimensional Guided Protocol for Autotransplantation – Science Direct [J]. 2021.

[11] Lundberg T, Isaksson S. A clinical follow-up study of 278 autotransplanted teeth [J]. British Journal of Oral and Maxillofacial Surgery, 1996, 34(2):181-185.

[12] Kim E, Jung J Y, Cha I H, et al. Evaluation of the prognosis and causes of failure in 182 cases of autogenous tooth transplantation[J]. Oral Surgery Oral Medicine Oral Pathology Oral Radiology & Endodontology, 2005, 100(1):112-119.

[13] Sans F A, Ribas F, Doria G, et al. Guided tooth autotransplantation in edentulous areas post, rthodontic treatment[J]. Journal of Esthetic and Restorative Dentistry, 2021(4).

[14] Lee S J, Jung I Y, Lee C Y, et al. Clinical application of computer‐aided rapid prototyping for tooth transplantation[J]. Dental Traumatology, 2001, 17(3): 114-119.

[15] Keightley A J, Cross D L, Mckerlie R A, et al. Autotransplantation of an immature premolar, with the aid of cone beam CT and computer-aided prototyping: a case report[J]. Dental Traumatology, 2010, 26(2):195-199.

[16] Shahbazian M, Jacobs R, Wyatt J, et al. Accuracy and surgical feasibility of a CBCT-based stereolithographic surgical guide aiding autotransplantation of teeth: in vitro validation[J]. Journal of Oral Rehabilitation, 2010, 37(11):854-859.

[17] Verweij J P, Jongkees F A, Moin D A, et al. Autotransplantation of teeth using computer-aided rapid prototyping of a three-dimensional replica of the donor tooth: a systematic literature review[J]. International Journal of Oral & Maxillofacial Surgery, 2017, 46(11).

[18] Hammarström L, Blomlöf L, Lindskog S. Dynamics of dentoalveolar ankylosis and associated root resorption [J]. Dental Traumatology, 1989, 5(4): 163-175.

[19] Mena-Lvarez J, Riad-Deglow E, N. Quispe-López, et al. Technology at the service of surgery in a new technique of autotransplantation by guided surgery: a case report [J]. BMC Oral Health, 2020, 20(1).

[20] ZHENG Haiyan, XIE Qianyi, LU Dongxiao, et al. Observation on the application effect of digital guide plate technology in clinical oral implantation [J]. Medical Theory and Practice, 2022(035-003).

[21] Schmidt S K, Cleverly D G. Tooth autotransplantation: An overview and case study [J]. Northwest dentistry, 2014, 91(4):29-33.

[22] CHEN Chunyan, BAO Haihong, CAO Zhiqiang,et al. Application of 3D printing technology in the treatment of complex fractures of the maxillofacial region[J]. Journal of PLA Medicine, 2015, 27(11):3.

[23] Ashkenazi, Malka, Shashua, et al. Computerized three-dimensional design for accurate orienting and dimensioning artificial dental socket for tooth autotransplantation[J]. Quintessence international, 2018.

[24] Shahbazian M, Jacobs R, Wyatt J, et al. Validation of the cone beam computed tomography–based stereolithographic surgical guide aiding autotransplantation of teeth: clinical case–control study[J]. Oral Surgery Oral Medicine Oral Pathology & Oral Radiology, 2013, 115(5):667-675.

[25] Han S, Wang H, Chen J, et al. Application Effect of Computer-Aided Design Combined with Three-Dimensional Printing Technology in Autologous Tooth Transplantation: A Retrospective Cohort Study. 2021.

[26] Shahbazian, Maryam, Jacobs, et al. Validation of the cone beam computed tomography-based stereolithographic surgical guide aiding autotransplantation of teeth: clinical case-control study [J]. Oral surgery, oral medicine, oral pathology oral radiology, 2013.

[27] Strbac G D, Schnappauf A, Giannis K, et al. Guided Autotransplantation of Teeth: A Novel Method Using Virtually Planned 3-dimensional Templates [J]. Journal of Endodontics, 2016:1844-1850.

[28] Moin D A, Derksen W, Verweij J, et al. A Novel Approach for Computer-Assisted Template-Guided Autotransplantation of Teeth with Custom 3D Designed/Printed Surgical Tooling. An ExVivo Proof of Concept [J]. Journal of Oral & Maxillofacial Surgery Official Journal of the American Association of Oral & Maxillofacial Surgeons, 2016:895-902.

[29] Delli, Konstantina, van, et al. Computer-aided planning and surgical guiding system fabrication in premolar autotransplantation: a 12-month follow up[J]. Dental traumatology: official publication of International Association for Dental Traumatology, 2016.