International Journal of Frontiers in Medicine, 2026, 8(3); doi: 10.25236/IJFM.2026.080303.
Ruyu Yang1, Xin Li2, Yuanzhu Long2, Jun Li3, Chengxue Yang3
1Nanming District People's Hospital, Guiyang, 550002, Guizhou, China
2School of Stomatology, Zunyi Medical University, Zunyi, 563000, Guizhou, China
3Hospital of Stomatology, Zunyi Medical University, Zunyi, 563000, Guizhou, China
The denture base constitutes a fundamental component of removable partial denture prostheses. Polymethyl methacrylate (PMMA) remains the predominant material for this application owing to its cost-effectiveness, favorable biocompatibility, and ease of processing. Nevertheless, PMMA-based denture bases exhibit inherent shortcomings, including susceptibility to aging, mechanical fracture, and bacterial adhesion, which predispose patients to secondary caries, periodontal pathologies, and denture stomatitis. Accumulating evidence indicates that the incorporation of nano-silver-loaded titanium dioxide (Ag-TiO₂) can substantially enhance both the mechanical integrity and antimicrobial efficacy of PMMA. However, the practical utility of Ag-TiO₂ in PMMA modification is considerably constrained by its pronounced tendency toward agglomeration, attributable to its large specific surface area and high polarity. To circumvent this obstacle, investigators have explored various preparative strategies to mitigate nanoparticle aggregation. The present review systematically synthesizes the current literature concerning the agglomeration issue of nano-Ag-TiO₂ and its impact on augmenting the mechanical strength and antibacterial performance of denture base resins.
Nano-silver-loaded titanium dioxide, Modification, Denture base resin
Ruyu Yang, Xin Li, Yuanzhu Long, Jun Li, Chengxue Yang. Research Progress on the Mechanical Properties and Antibacterial Activity of Denture Base Resins Modified with Nano-Silver-Loaded Titanium Dioxide. International Journal of Frontiers in Medicine (2026), Vol. 8, Issue 3: 21-28. https://doi.org/10.25236/IJFM.2026.080303.
[1] Wolfaardt JF, Cleaton-Jones P, Fatti P. The occurrence of porosity in a heat-cured poly (methyl methacrylate) denture base resin[J]. J Prosthet Dent, 1986, 55(3): 393-400.
[2] Kattadiyil MT, Jekki R, Goodacre CJ, et al. Comparison of treatment outcomes in digital and conventional complete removable dental prosthesis fabrications in a predoctoral setting[J]. J Prosthet Dent, 2015, 114(6): 818-825.
[3] Takahashi N, Iwasa F, Inoue Y, et al. Evaluation of the durability and antiadhesive action of 2-methacryloyloxyethyl phosphorylcholine grafting on an acrylic resin denture base material[J]. J Prosthet Dent, 2014, 112(2): 194-203.
[4] Yannikakis S, Zissis A, Polyzois G, et al. Evaluation of porosity in microwave-processed acrylic resin using a photographic method[J]. J Prosthet Dent, 2002, 87(6): 613-619.
[5] Faot F, Cavalcanti YW, Mendonça e Bertolini M, et al. Efficacy of citric acid denture cleanser on the Candida albicans biofilm formed on poly(methyl methacrylate): effects on residual biofilm and recolonization process[J]. BMC Oral Health, 2014, 14: 77.
[6] Pokrowiecki R, Wojnarowicz J, Zareba T, et al. Nanoparticles and human saliva: a step towards drug delivery systems for dental and craniofacial biomaterials[J]. Int J Nanomedicine, 2019, 14: 9235-9257.
[7] Makvandi P, Gu JT, Zare EN, et al. Polymeric and inorganic nanoscopical antimicrobial fillers in dentistry[J]. Acta Biomater, 2020, 101: 69-101.
[8] Wang Y, Zhang X, Bai Y, et al. Anticancer and antibacterial activities of silver nanoparticles (AgNPs) synthesized from Cucumis melo L[J]. J Nanosci Nanotechnol, 2020, 20(7): 4143-4151.
[9] Gad MM, Fouda SM, Al-Harbi FA, et al. PMMA denture base material enhancement: a review of fiber, filler, and nanofiller addition[J]. Int J Nanomedicine, 2017, 12: 3801-3812.
[10] Gad MM, Abualsaud R. Behavior of PMMA denture base materials containing titanium dioxide nanoparticles: a literature review[J]. Int J Biomater, 2019, 2019: 6190610.
[11] Zhu X, Guo A, Yan Z, et al. PET/Ag NW/PMMA transparent electromagnetic interference shielding films with high stability and flexibility[J]. Nanoscale, 2021, 13(17): 8067-8076.
[12] Gad MM, Abualsaud R, Rahoma A, et al. Effect of zirconium oxide nanoparticles addition on the optical and tensile properties of polymethyl methacrylate denture base material[J]. Int J Nanomedicine, 2018, 13: 283-292.
[13] Ai M, Du Z, Zhu S, et al. Composite resin reinforced with silver nanoparticles-laden hydroxyapatite nanowires for dental application[J]. Dent Mater, 2017, 33(1): 12-22.
[14] Altarazi A, Haider J, Alhotan A, et al. 3D printed denture base material: the effect of incorporating TiO₂ nanoparticles and artificial ageing on the physical and mechanical properties[J]. Dent Mater, 2023, 39(12): 1122-1136.
[15] Abo Salh IBE, Add El-Salam EB, Ezzat AA, et al. Antimicrobial effect of three different nanoparticles-modified 3D-printed denture resin: an in vitro study[J]. J Int Soc Prev Community Dent, 2025, 15(1): 42-49.
[16] Cascione M, De Matteis V, Pellegrino P, et al. Improvement of PMMA dental matrix performance by addition of titanium dioxide nanoparticles and clay nanotubes[J]. Nanomaterials (Basel), 2021, 11(8): 2027.
[17] Cheng Y, Sakai T, Moroi R, et al. Self-cleaning ability of a photocatalyst-containing denture base material[J]. Dent Mater J, 2008, 27(2): 179-186.
[18] Mohamed SH. Reinforced filler in denture base materials[M]//Ardelean LC, Rusu LC, eds. Advances in Dentures: Prosthetic Solutions, Materials and Technologies. London: IntechOpen, 2024.
[19] Syahida A, Widodo TT, Hadianto E. Ikatan polimer PMMA dengan titanium dioksida[J]. MEDALI Jurnal: Media Dental Intelektual, 2024, 6(2): 103-112.
[20] Kul E, Aladağ Lİ, Yesildal R. Evaluation of thermal conductivity and flexural strength properties of poly(methyl methacrylate) denture base material reinforced with different fillers[J]. J Prosthet Dent, 2016, 116(5): 803-810.
[21] Lung CY, Sarfraz Z, Habib A, et al. Effect of silanization of hydroxyapatite fillers on physical and mechanical properties of a bis-GMA based resin composite[J]. J Mech Behav Biomed Mater, 2016, 54: 283-294.
[22] Xia Y, Zhang F, Xie H, et al. Nanoparticle-reinforced resin-based dental composites[J]. J Dent, 2008, 36(6): 450-455.
[23] Totu EE, Nechifor AC, Nechifor G, et al. Poly(methyl methacrylate) with TiO₂ nanoparticles inclusion for stereolitographic complete denture manufacturing - the future in dental care for elderly edentulous patients?[J]. J Dent, 2017, 59: 68-77.
[24] Erhim EA, Abbood MA, Halbos HT. Assessment of surface hardness and impact strength of denture base resins reinforced with silver-titanium dioxide and silver-zirconium dioxide nanoparticles: in vitro study[J]. Open Engineering, 2024, 14(1).
[25] Asar NV, Albayrak H, Korkmaz T, et al. Influence of various metal oxides on mechanical and physical properties of heat-cured polymethyl methacrylate denture base resins[J]. J Adv Prosthodont, 2013, 5(3): 241-247.
[26] Karci M, Demir N, Yazman S. Evaluation of flexural strength of different denture base materials reinforced with different nanoparticles[J]. J Prosthodont, 2019, 28(5): 572-579.
[27] Shirkavand S, Moslehifard E. Effect of TiO₂ nanoparticles on tensile strength of dental acrylic resins[J]. J Dent Res Dent Clin Dent Prospects, 2014, 8(4): 197-203.
[28] Cierech M, Wojnarowicz J, Kolenda A, et al. Zinc oxide nanoparticles cytotoxicity and release from newly formed PMMA-ZnO nanocomposites designed for denture bases[J]. Nanomaterials (Basel), 2019, 9(9): 1318.
[29] Yoon SW, Cho YE. A study of the antifungal properties and flexural strength of 3D printed denture base resin containing titanium dioxide nanoparticles[J]. J Korean Acad Prosthodont, 2024, 62(2): 95-103.
[30] Erhim EA, Abbood MA, Halbos HT. Assessing the impact of Ag: TiO₂ and Ag: ZrO₂ nanoparticles on the flexural strength of self-cured denture base resin[J]. J Phys Conf Ser, 2024, 2857(1): 012056.
[31] Aziz HK. TiO₂-nanofillers effects on some properties of highly-impact resin using different processing techniques[J]. Open Dent J, 2018, 12: 202-212.
[32] AlGhamdi MA, Fouda SM, Al-Dulaijan YA, et al. Nanocomposite 3D printed resins containing titanium dioxide (TiO₂) nanoparticles: an in vitro analysis of color, hardness, and surface roughness properties[J]. Front Dent Med, 2025, 6: 1581461.
[33] Chladek G, Basa K, Mertas A, et al. Effect of storage in distilled water for three months on the antimicrobial properties of poly(methyl methacrylate) denture base material doped with inorganic filler[J]. Materials (Basel), 2016, 9(5): 328.
[34] Song R, Zhong Z, Lin L. Evaluation of chitosan quaternary ammonium salt-modified resin denture base material[J]. Int J Biol Macromol, 2016, 85: 102-110.
[35] Dalwai S, Rodrigues SJ, Baliga S, et al. Comparative evaluation of antifungal action of tea tree oil, chlorhexidine gluconate and fluconazole on heat polymerized acrylic denture base resin - an in vitro study[J]. Gerodontology, 2016, 33(3): 402-409.
[36] Anehosur GV, Kulkarni R, Naik MG, et al. Synthesis and determination of antimicrobial activity of visible light activated TiO₂ nanoparticles with polymethyl methacrylate denture base resin against Staphylococcus aureus[J]. J Gerontol Geriat Res, 2012, 1: 103-111.
[37] Dědková K, Lang J, Matějová K, et al. Nanostructured composite material graphite/TiO₂ and its antibacterial activity under visible light irradiation[J]. J Photochem Photobiol B, 2015, 149: 265-271.
[38] Goei R, Lim TT. Ag-decorated TiO₂ photocatalytic membrane with hierarchical architecture: photocatalytic and anti-bacterial activities[J]. Water Res, 2014, 59: 207-218.
[39] Zhao L, Wang H, Huo K, et al. Antibacterial nano-structured titania coating incorporated with silver nanoparticles[J]. Biomaterials, 2011, 32(24): 5706-5716.
[40] Chen R, Han Z, Huang Z, et al. Antibacterial activity, cytotoxicity and mechanical behavior of nano-enhanced denture base resin with different kinds of inorganic antibacterial agents[J]. Dent Mater J, 2017, 36(6): 693-699.
[41] Savitha PN, Dayalan M, Choudhary VT. Evaluation of antimicrobial properties of conventional poly methyl methacrylate denture base resin materials containing silver doped titanium dioxide nanoparticles against cariogenic bacteria and Candida albicans[J]. IP Ann Prosthodont Restor Dent, 2023, 9(4):206-213.
[42] Saifi MA, Khan W, Godugu C. Cytotoxicity of nanomaterials: using nanotoxicology to address the safety concerns of nanoparticles[J]. Pharm Nanotechnol, 2018, 6(1): 3-16.
[43] Wang J, Wang J, Liu Y, et al. Aging-independent and size-dependent genotoxic response induced by titanium dioxide nanoparticles in mammalian cells[J]. J Environ Sci (China), 2019, 85: 94-106.
[44] Angelé-Martínez C, Ameer FS, Raval YS, et al. Polyphenol effects on CuO-nanoparticle-mediated DNA damage, reactive oxygen species generation, and fibroblast cell death[J]. Toxicol In Vitro, 2022, 78: 105252.
[45] Zhang N, Xiong G, Liu Z. Toxicity of metal-based nanoparticles: challenges in the nano era[J]. Front Bioeng Biotechnol, 2022, 10: 1001572.
[46] Murugadoss S, Brassinne F, Sebaihi N, et al. Agglomeration of titanium dioxide nanoparticles increases toxicological responses in vitro and in vivo[J]. Part Fibre Toxicol, 2020, 17(1): 10.
[47] Prucek R, Tuček J, Kilianová M, et al. The targeted antibacterial and antifungal properties of magnetic nanocomposite of iron oxide and silver nanoparticles[J]. Biomaterials, 2011, 32(21): 4704-4713.
[48] Amin ML, Joo JY, Yi DK, et al. Surface modification and local orientations of surface molecules in nanotherapeutics[J]. J Control Release, 2015, 207: 131-142.
[49] Han Z, Sarkar S, Smith AM. Zwitterion and oligo(ethylene glycol) synergy minimizes nonspecific binding of compact quantum dots[J]. ACS Nano, 2020, 14(3): 3227-3241.
[50] Wang K, Wang S, Yin J, Yang Q, Yu Y, Chen L. Long-term application of silver nanoparticles in dental restoration materials: potential toxic injury to the CNS[J]. J Mater Sci Mater Med,2023,34(11): 52.