In this day and age, using municipal solid waste (MSW) as fuel to produce heat and electricity has becoming an industry trend. However, compare with other fuels, the flue gas of waste combustion contains a lot of corrosive components such as hydrogen chloride and ash. When the temperature of the steam which inside the boiler is too high, some elements like chlorine, sulfur and its compounds will corrode the pipe, and also lower the power generation efficiency. Therefore, it is necessary to analyze the high-temperature anti-corrosive materials and antisepsis technology for super heaters to improve the steam parameters. Some specific methods about how to prevent high temperature corrosion were illustrated in this report, mechanism and precaution measures related to high temperature are also discussed in this paper.

Zisen Liu, Xin Wang and Guangyao Du. Study on high temperature corrosion of super heater in MSW combustion.  International Journal of New Developments in Engineering and Society (2017) Vol.1, Num.2: 101-105.

[1].High temperature corrosion in a 65 MW waste to energy plant. Kristoffer Persson, Markus Broström,Jörgen Carlsson,Rainer Backman. 2007, Fuel Processing Technology, Vol. 88, pp. 11-12.

[2].P. Rademakers, W. Hesseling,J. van de Wetering. Review on corrosion in waste incinerators,and possible effect of bromine. s.l.: TNO industrial Technology, 2002.

[3].Alkali and zinc chlorides in waterwall tube corrosion:Effects of pure salts and mixtures. SLOMIAN, ANDREAS. Gothenburg : s.n., 2013.
[4].Albina, Dionel O. Theory and Experience on Corrosion of Waterwall and Superheater Tubes of Waste-To-Energy Facilities. master thesis : Columbia University, 2005.

[5].Reducing high temperature corrosion when burning waste by adding digested sewage sludge . Sofia Karlsson1, Lars-Erik Åmand,Jesper Pettersson. 2006, Corrosion Science, pp. 1368-1378.

[6].High temperature corrosion mechanisms and effect of alloying elements for materials used in waste incineration environment. Kawahara, Yuuzou. 2, s.l: Corrosion Science, 2002, Corrosion Science, Vol. 44, pp. 223-245.
[7].Hot corrosion in a temperature gradient. G.R.holcomb. 8, 2000, Materials and Corrosion, Vol. 51, pp. 564-569.

[8].Superheater corrosion in biomass and waste fired boilers. Viklund, Peter. Stockholm: Chemical Science and Engineering , 2013.

[9].Cr heat resistant steels: alloy design, TEM characterisation of microstructure evolution and creep response at 650°C. Jara, David Rojas. Bochum : s.n., 2011.

[10].Broström, Markus. Aspects of alkali chloride chemistry on deposit formation and high temperature corrosion in biomass and waste fired boilers. Umeå: s.n., 2010.

[11]. ZUO Jun, CHEN En-jian, LIN Bo-chuan , Y AN Chang-feng, Y ANG Wei-bin. Research Status Of Corrosion and Protection in superheter. BOILER TECHNOLOGY.2002, Vol. 33