Welcome to Francis Academic Press

International Journal of New Developments in Engineering and Society, 2019, 3(5); doi: 10.25236/IJNDES.030516.

Dynamic Lubrication Analysis of Main Bearing Coupling Based on Fluid-Structure Coupled Heat Transfer

Author(s)

Peng Huo*, Huihua Feng, Weizheng Zhang, Li Wei, Liting Wang

Corresponding Author:
Peng Huo
Affiliation(s)

Beijing Institute of Technology, Beijing, China
*Email: [email protected]
*Corresponding Author

Abstract

The internal combustion engine is one of the most important power machinery in the world today, and it provides tremendous impetus for the progress and development of human civilization. During the working process, the internal combustion engine is subjected to various excitation forces, and the vibration of the internal combustion engine is often caused by the excitation force of various frequencies. In the past, due to limited computing power, people often used the dynamic external load of the bearing as the fixed input when performing the oil lubrication analysis of the crankshaft main bearing. In the system dynamics analysis, the influence of oil film lubrication is often neglected or simple. The linear model is replaced. In order to ensure the reliability of the work, the design of the internal combustion engine requires the crankshaft to have high strength, stiffness and good dynamic and static characteristics. Based on the principle of fluid-structure coupled heat transfer, the lubrication problem of the main bearing of internal combustion engine is discussed. The dynamic characteristics of the component under the coupling of system dynamics and fluid dynamic lubrication are simulated.

Keywords

Internal combustion engine, Oil film, Lubrication, Bearing, Fluid-solid coupling heat transfer

Cite This Paper

Peng Huo, Huihua Feng , Weizheng Zhang , Li Wei , Liting Wang. Dynamic Lubrication Analysis of Main Bearing Coupling Based on Fluid-Structure Coupled Heat Transfer. International Journal of New Developments in Engineering and Society (2019) Vol.3, Issue 5: 139-147. https://doi.org/10.25236/IJNDES.030516.

References

[1] Garcia-Atance Fatjo, G.,  Smith, E. H. , &  Sherrington, I. . (2014). Mapping lubricating film thickness, film extent and ring twist for the compression-ring in a firing internal combustion engine. Tribology International, vol. 70, pp.112-118.
[2] Zavos, A. B. , &  Nikolakopoulos, P. G. . (2015). Simulation of piston ring tribology with surface texturing for internal combustion engines. Lubrication Science, vol.27, no.3, pp.151-176.
[3] Thomas, W. ,  Ulrike, C. B. ,  Claudia, L. ,  Ditrói Ferenc,  Takács Sándor, &  Johannes, S. B. , et al. (2018). Wear of different material pairings for the cylinder liner – piston ring contact. Industrial Lubrication and Tribology, vol.70, no.4, pp.687-699.
[4] Dey, A. R. , &  Misra, R. D. . (2017). Effect of infiltration of bio-lubricant on the performance of a compression ignition engine fuelled with biodiesel blends. Clean Technologies and Environmental Policy, vol.19, no.2, pp.553-563.
[5] Liu, Z. ,  Wei, M. ,  Song, P. ,  Emhardt, S. ,  Tian, G. , &  Huang, Z. . (2018). The fluid-thermal-solid coupling analysis of a scroll expander used in an orc waste heat recovery system. Applied Thermal Engineering, vol138, pp.72-82.
[6] Shetab Bushehri, M. R. ,  Ramin, H. , &  Salimpour, M. R. . (2015). A new coupling method for slip-flow and conjugate heat transfer in a parallel plate micro heat sink. International Journal of Thermal Sciences, vol. 89, pp.174-184.
[7] Koren, C. ,  Vicquelin, R. , &  Gicquel, O. . (2017). Self-adaptive coupling frequency for unsteady coupled conjugate heat transfer simulations. International Journal of Thermal Sciences, vol. 118, pp.340-354.
[8] Xu Z G, Qin J, Zhou X, et al.(2018) Forced convective heat transfer of tubes sintered with partially-filled gradient metal foams (GMFs) considering local thermal non-equilibrium effect. Applied Thermal Engineering, vol. 137:pp.101-111.
[9] Chen, X. ,  Zhou, P. ,  Kang, R. K. , &  Dong, Z. G. . (2016). Numerical study on thermal deformation characteristic of water-cooled mirror with interdigitated channels. Applied Thermal Engineering, vol. 98, pp.357-364.
[10] Xu, L. ,  Cheng, L. ,  Cai, Y. ,  Liu, Y. ,  Wang, Q. , &  Luo, Z. , et al. (2016). Heat flux determination based on the waterwall and gas–solid flow in a supercritical cfb boiler. Applied Thermal Engineering, vol. 99, pp. 703-712.
[11] Su, H. ,  Rahmani, R. , &  Rahnejat, H. . (2016). Thermohydrodynamics of bidirectional groove dry gas seals with slip flow. International Journal of Thermal Sciences, vol. 110, pp.270-284.
[12] Khuong, L. S. ,  Masjuki, H. H. ,  Zulkifli, N. W. M. ,  Mohamad, E. N. ,  Kalam, M. A. , &  Alabdulkarem, A. , et al. (2017). Effect of gasoline–bioethanol blends on the properties and lubrication characteristics of commercial engine oil. RSC Adv., vol.7, no.25,pp. 15005-15019.
[13] Tomic, M. ,  Savin, L. ,  Micic, R. ,  Simikic, M. , &  Furman, T. . (2014). Possibility of using biodiesel from sunflower oil as an additive for the improvement of lubrication properties of low-sulfur diesel fuel. Energy, vol. 65, pp.101-108.