A transformable drone with four propellers is applicable for farmers to identify weeds that grow in farmland areas efficiently. When such a drone flies in the small mode, it can easily maneuver between tall crops or small barns, increasing its agility. When the drone flies in the large mode, the efficiency of flight increases, and less energy is required. By adding a camera that contains algorithms to distinguish crops and weeds, farmers could effectively identify weeds and apply herbicides accurately, which saves time and prevents potential pollution caused by herbicide overuse. The drone uses a parallelogram structure that connects the four mechanical arms carrying the propellers, so all mechanical arms can simultaneously turn in the same direction. Two more mechanical arms attach the parallelogram structure and the flight control, which is placed at the center of the drone body. When the steering engine fixed below the flight control spins, the whole structure and the flight control also turn in the same direction as the structure to maintain routine flight. Later experimentation proved that the novelty of a turning instead of fixed flight control could support flight with transformation in midair. The wingspan of the drone could be shortened by approximately 50% when turned to small mode. In floating and flying tests, the large mode shows a remarkable advantage in battery efficiency and velocity within the tested period. However, the camera technology used to identify weeds must be fixed and perfected.

Xuan Jiang. Transformable Drone with Four Propellers for Agricultural Use. International Journal of New Developments in Engineering and Society (2023) Vol.7, Issue 6: 34-41. https://doi.org/10.25236/IJNDES.2023.070607.

[1] Derrouaoui, S. H., Y. Bouzid, and M. Guiatni. "Towards a new design with generic modeling and adaptive control of a transformable quadrotor." The Aeronautical Journal 125.1294 (2021): 2169-2199.

[2] Derrouaoui, Saddam Hocine, Yasser Bouzid, and Mohamed Guiatni. "PSO based optimal gain scheduling backstepping flight controller design for a transformable quadrotor." Journal of Intelligent & Robotic Systems 102.3 (2021): 67.

[3] Tothong, Thanat, et al. "Morphing Quadcopters: A Comparison between Proposed and Prominent Foldable Quadcopters." 2020 11th IEEE Annual Information Technology, Electronics and Mobile Communication Conference (IEMCON). IEEE, 2020.

[4] Derrouaoui, S. H., et al. "Dynamic modeling of a transformable quadrotor." 2020 International Conference on Unmanned Aircraft Systems (ICUAS). IEEE, 2020.

[5] Emran, Bara J., and Homayoun Najjaran. "Switching control of quadrotor with adaptation mechanism." 2016 IEEE International Conference on Systems, Man, and Cybernetics (SMC). IEEE, 2016.

[6] Badr, Sherif, Omar Mehrez, and A. E. Kabeel. "A design modification for a quadrotor UAV: modeling, control and implementation." Advanced Robotics 33.1 (2019): 13-32.

[7] Idrissi, Moad, Mohammad Salami, and Fawaz Annaz. "Modelling, simulation and control of a novel structure varying quadrotor." Aerospace Science and Technology 119 (2021): 107093.

[8] Odelga, Marcin, Paolo Stegagno, and Heinrich H. Bülthoff. "A fully actuated quadrotor UAV with a propeller tilting mechanism: Modeling and control." 2016 IEEE international conference on advanced intelligent mechatronics (AIM). IEEE, 2016.

[9] Palunko, Ivana, and R. Fierro. "Adaptive Control of a Quadrotor with Dynamic Changes in the Center of Gravity." 2011:2626-2631.

[10] Belmouhoub, Amina, et al. "Robust Control based on Synergetic Theory for Transformable Quadrotor." IFAC-Papers OnLine 55.22 (2022): 31-36.