With the development of the marine industry, the demand for marine power system oil-water separator is gradually increasing. Marine oil-water separator for industrial oil-water separator of a kind, in the operation of the ship generated by the marine oil will be processed by the oil-water separator, but the oil-water separator is not always in operation, it will be in the oil and water stored in a certain amount of automatic opening for processing, which makes the oil and water will be in operation, with the lowering of the liquid level deposited in the oil-water separator tank on the inner wall, which is gradually accumulated and thickened, the presence of oil will cause corrosion of the tank, and reduce the capacity of the tank, affecting the classification effect of the oil-water separator. The presence of oil will cause corrosion on the tank, and reduce the capacity of the tank, affecting the classification effect of oil-water separator. In order to solve the problem that the traditional oil-water separator is not efficient under high load conditions, this paper proposes an efficient combined oil-water separator device for marine use after a series of researches and experiments. The device can effectively remove the oil in the tank body wall, to achieve the maintenance of the oil-water separator, to ensure that the oil-water separator can be used efficiently.

Huixia Zhang, Haishen Yu, Yadong Tao, Kaige Zhang. Design and Research of High Efficiency Combined Oil-water Separator for Marine Use. Academic Journal of Engineering and Technology Science (2023) Vol. 6, Issue 12: 16-20. https://doi.org/10.25236/AJETS.2023.061203.

[1] Hu Q, Hong L. Problems and Improvement Measures in the Treatment of Bilge Water in Engine Room [J]. Ship & Ocean Engineering, 2005, 12(04): 39-48.

[2] Chen X, Guo S, Huang M, et al. Improvement Techniques for Environmental Performance of Ship Oil-Water Separators [J]. Shipbuilding Engineering, 2018, 40(05): 56-63.

[3] Li K, Luo X. Modeling and Simulation Study on Ship Oil-Water Separator Systems [J]. Ship Electronic Technology, 2023, 43(01): 111-116.

[4] Jiang C. Introduction and Inspection Considerations of a Novel Centrifugal Oil-Water Separator [J]. China Water Transport, 2022(09): 90-92.

[5] Lin H, Yang G, Li K. Design of Automatic Monitoring System for Sewage Discharge from Ship Oil-Water Separators [J]. China Navigation, 2014, 37(03): 32-35.

[6] Jiang C. Introduction and Inspection Considerations of a Novel Centrifugal Oil-Water Separator [J]. China Water Transport, 2022, 16(09): 90-92. 

[7] Lian J, Cai X, & Yan H. Risk Analysis and Suggestions on Intentional Discharge of Bilge Water in Ships [J]. World Shipping, 2019, 42(01): 87-91.

[8] Lin H, Li H, Cai Z. Design of Automatic Recording and Monitoring System for the Use of Ship Bilge Water Separators [J]. Ship & Ocean Engineering, 2008, 37(06): 26-28.

[9] Jia J. Profound Defects in Ship Bilge Water Separators [J]. Ship & Ocean Engineering, 2017, 46(02): 161-165.

[10] Wang S, Tian L, Duan J, et al. Design of a PLC-Based Remote Control System for Oil-Water Separators [J]. Manufacturing Automation, 2016, 38(01): 124-127.