Welcome to Francis Academic Press
Login | Register

Academic Journal of Engineering and Technology Science, 2018, 1(1); doi: 10.25236/AJETS.020001.

Experimental Study on Gear Extrusion Machining Process of Gearbox Synchronizer Gear Hub

Author(s)

SHI Yaochen1, LI Zhanguo2, LIN Dan3, LI Qinghua1

Corresponding Author:
SHI Yaochen
Affiliation(s)

1 Changchun University, Changchun, 130022, China.
2 Changchun University of technology, Changchun, 130022, China.
3 Changchun University of Science and Technology, Changchun, 130022, China.

Abstract

This study treats the synchronizer gear hub gear extrusion machining process for J6L medium truck. The CA6140 lathe has been reformed into a gear extrusion machine and the experimental research about the gear extrusion plastic forming processing has been did. The tooth surface roughness and hardness after the gear extruding process under the given process parameters had also been analyzed. The experimental results showed that the surface roughness had been improved after the gear extruding processing, and the tooth surface hardness was became higher compare with the original tooth surface. It is obviously that the gear extrusion machining process can improve the tooth surface quality of the gear hub and get a better process result.

Keywords

Synchronizer gear hub; Gear extrusion machining process; The tooth surface roughness and hardness

Cite This Paper

SHI Yaochen, LI Zhanguo, LIN Dan, LI Qinghua. Experimental Study on Gear Extrusion Machining Process of Gearbox Synchronizer Gear Hub. Academic Journal of Engineering and Technology Science (2018) Vol. 1: 1-8.

References

[1] Xu Wanli, Zhao Wei, Zhang Xueming, Xu Ximeng, Li Bin. Analysis on failure process and failure Mechanism of transmission synchronizer [J]. Journal of Mechanical Engineering, 2009(12): 189~192.
[2] Xie Zongyu. Auto transmission synchronizer test rig developed[J]. Equipment Manufacturing Technology, 2015(3): 58~60.
[3] Xu Liyou, Cao Qingmei, Zhou Zhili, Niu Yi. Review on the Development of tractor Transmission[J]. Journal of Agricultural Mechanization Research, 2009(12): 189~192.
[4]Zhang Hua, Xu Linlin, Han Yinan, Yang Jianjun and Ma Jiangmin. Design and machining experiment of constant-depth tooth spiral bevel gear [J]. Journal of Mechanical Transmission, 2014, 8, 38(8): 157~159 .
[5] Yin Xinying. A kind of high efficiency gear finish machining technology-gear extruding process[J]. Journal of Hebei Institute of Mechano-Electric Engineering. 1998,15(2): 81~85.
[6Li Yanbin, Zheng Peng. Precise ausform methods used for machining gears with hard surface [J]. Journal of Shenyang university of technology, 2002, 12, 24(6): 457~460.
[7]Chu Yan, Huang Suzhen. Design of a new type gear cold extruding machine[J].New technology and product, 2006(1): 84~85.
[8]Zhang Lihui. Study on warm precision forging of spur gears with big modulus and high boss [M]. Hefei Polytechnic University. 2005.