The effect of adding trace rare earth Er on the properties of Sn-0.3Ag-0.7Cu-0.05Mn lead-free solder material is investigated. The experimental results show that the addition of Er elements can improve the Vickers hardness of lead-free Sn-0.3Ag-0.7Cu-0.05Mn solder. The wettability of lead-free Sn-0.3Ag-0.7Cu-0.05Mn-xEr solder exhibits an initial increase followed by a decrease with increasing Er content. Microscopic analysis of the solder's structure reveals that when the Er content is 0.1wt.%, the β-Sn matrix becomes significantly refined, and intermetallic compound (IMC) grain size is minimized and uniformly dispersed in the matrix, playing a role in grain refinement. However, when the Er content exceeds 0.1wt.%, the IMC grain size increases, and the presence of brittle large-sized IMCs adversely affects the reliability of the solder joints. The addition of rare earth Er noticeably suppresses the growth of the interface IMC layer. Furthermore, when the Er content at 0.1 wt.%, the surface smoothness of the solder joint interface reaches its optimal state, with virtually no observable Kirkendall voids.

Yongfa Zheng, Qiming Zhu, Jian Li. Effect of trace rare earth Er on the properties of Sn-0.3Ag-0.7Cu-0.05Mn lead-free solder material. Academic Journal of Materials & Chemistry (2025), Vol. 6, Issue 1: 29-35. https://doi.org/10.25236/AJMC.2025.060103.

[1] Wang M, Wang J, Ke W. Corrosion behavior of Sn-3.0Ag-0.5Cu lead-free solder joints[J]. Microelectronics Reliability, 2017, 73: 69-75.

[2] RanLi M I I, Salleh M A A M, Abdullah M M A B, et al. Formation and Growth of Intermetallic Compounds in Lead-Free Solder Joints: a Review[J]. Materials, 2022, 15(4): 1451.

[3] Wang X, Sun F, Han B, et al. Wetting characteristics of Sn-5Sb-CuNiAg lead-free solders on the copper substrate[J]. Soldering & Surface Mount Technology, 2021, 34(2): 96-102.

[4] Wang Q, Chen H, Wang F. Effect of Trace Zn Addition on Interfacial Evolution in Sn-10Bi/Cu Solder Joints during Aging Condition[J]. Materials, 2019, 12(24): 4240.

[5] Yang F, Zhang L, Liu Z Q, et al. Properties and Microstructures of Sn-Bi-X Lead-Free Solders[J]. Advances in Materials Science and Engineering, 2016.

[6] Shalaby R M, Kamal M, Ali E A M, et al. Design and Properties of New Lead-Free Solder Joints Using Sn-3.5Ag-Cu Solder[J]. Silicon, 2018, 10(5): 1861-1871.

[7] Lu B, Chestnut H, Wang Juanhui, et al. Effect of rare earth Er on the organization and properties of Sn-3.0Ag-0.5Cu lead-free solder alloy[J]. China Journal of Nonferrous Metals, 2007(4): 518-524.

[8] Pan Y C. Effect of manganese doping on interfacial reaction and mechanical properties of lead-free solder Sn-0.3Ag-0.7Cu[D]. South China University of Technology, 2014.

[9] Zhao L, Teng Y, Chen X, et al. Effect of Ce content on the properties of SnAg0.1Cu0.7 lead-free solder alloy[J]. Nonferrous Metal Engineering, 2020, 10(9): 25-29.

[10] Song, Shallow. Effect of Cr addition on the interfacial reaction and performance of Sn58Bi new lead-free solder joints [D]. Guangxi University, 2022.

[11] Guo F. Composite lead-free electronic solders[M]. Lead-Free Electronic Solders. Boston, MA: Springer US, 2007: 129-145.

[12] Li, Z L. Study on the effect of TiO_2 nanoparticle doping and solder joint size on the interfacial reaction of lead-free micro-solder joints [D]. South China University of Technology, 2016.

[13] QianQian S, WenChao Y, Yitai L, et al.Interfacial reaction and mechanical properties of Sn58Bi-XCr solder joints.pdf[J]. Vacuum, 2021, 194.

[14] Dele-Afolabi, Azmah Hanim M A, Ojo-Kupoluyi O J, et al. Impact of different isothermal aging conditions on the IMC layer growth and shear strength of MWCNT-reinforced Sne5Sb solder composites on Cu substrate [J]. Journal of Alloys and Compounds, Journal of Alloys and Compounds, 2019, 808.

[15] Tz-Cheng C, Kejun Z, Stierman R, et al. Effect of thermal aging on board level drop reliability for Pb-free BGA packages[J]. 2004,2:1256-1262.