Academic Journal of Engineering and Technology Science, 2025, 8(3); doi: 10.25236/AJETS.2025.080304.
Li Hui
Zaozhuang Vocational College of Science and Technology, Tengzhou, China
Including the main support, the oil storage barrel is installed above the main support , the outside of the double-ended screw rods is provided with an adjustment mechanism that can adjust the width of the slide rail of the mechanical and electrical products of different widths when lubricating oil is applied, and the inside of the main support is provided with an adaptive mechanism that can adjust the oil amount of the slide rail of the mechanical and electrical products of different section shapes and convex parts during the lubricating oil application process. A control mechanism is installed above the inner side of the main support to adjust the size of the oil outlet under the oil storage drum. In this study, the corresponding drain tubing can be effectively squeezed through the flow blocking mechanism, so that the overlapping drain tubing can be effectively pressed and blocked, thus avoiding the problem of oil produced by the drain tubing at the overlapping position, and at the same time improving the uniformity of lubricating oil applied by the brush to the slide rails with different widths and different inner convex shapes.
Gantry slide rail, lubricating oil, smearing equipment
Li Hui. Research and discussion on lubricating oil smearing equipment for sliding rail of gantry frame. Academic Journal of Engineering and Technology Science (2025), Vol. 8, Issue 3: 23-27. https://doi.org/10.25236/AJETS.2025.080304.
[1] ZHU Y J, Research on Lubrication of Crane Wire Rope[J]. Journal of Nantong Vocational & Technical Shipping College,2014,13(01):26-28.
[2] CHENG L, ZHENG Q, YANG Y F, et al. Design of automatic lubrication systems of open gear transmission[J].Machine,2013,40(02):54-59
[3] LU P Y. Application of lubrication cooling system on the reducer of container bridge crane[J]. Equipment Technology,2025,(03):76-81.
[4] HAN J Z, OUYANG Y L.A brief discussion on the safety problems in the use of gantry frame[J]. Construction Safety,2006,(08):55-56.
[5] TIAN S H. Talk about the correct use of lubricating oil [J]. Shandong Agricultural Mechanization, 2017,(03):45.