Academic Journal of Engineering and Technology Science, 2020, 3(4); doi: 10.25236/AJETS.2020.030413.
Song Shengwei, Lou Junsheng, Wan Feng, Liu Pengwei
Heilongjiang University of Science & Technology, Harbin, 150022, China
In order to explore the effect of the tooth structure of the cutter tooth on its strength and the mechanical properties of the cut coal rock, the cutter teeth of JBA69, GC-20116 and SrFc1007 were selected as the research objects, and the cutter tooth area and cutting surface area were calculated Strength and build a mechanical model. The ABAQUS finite element software was used to establish three finite tooth models of cutter teeth for cutting coal and rock. The mechanical characteristics and stress and strain were analyzed according to the simulation results. The results show that the maximum stress and strain of the cutter teeth is at the tooth shank at the port of the tooth seat. The average cutting force of the cutter tooth GC-20116 is the smallest, and the average cutting force and traction force of the cutter tooth SrFc1007 are the largest. SrFc1007 cutter tooth tip area is the least stressed, and JBA69 cutter tooth tip area is the most stressed. SrFc1007 cutter teeth are subject to the most stress.
Tooth structure, Abaqus, Strength, Mechanical properties
Song Shengwei, Lou Junsheng, Wan Feng, Liu Pengwei. Strength Calculation and Mechanical Characteristics Analysis of Knife-Shaped Teeth with Different Teeth Shapes. Academic Journal of Engineering and Technology Science (2020) Vol. 3 Issue 4: 129-144. https://doi.org/10.25236/AJETS.2020.030413.
[1] A. A. Ordin, A. M. Timoshenko, D. V. Botvenko(2019). Optimizing Shearer Web Width in Underground Mining of Gently Dipping Methane-Bearing Coal Seams. Journal of Mining Science,Vol.55, No.6, pp.938-945.
[2] Nguyen Van Xuan, NguenKhac Linh, VV Gabov and YV Lykov (2019). Relocation schemes of picks with cutting, coupling and group cuts on shearer cutting drums. IOP Conference Series: Earth and Environmental Science, Vol.378, pp. 12-22.
[3] Mao, J., Wang, X., Chen, H., Zhang, Y. (2018).Fatigue life analysis of shearer picks based on load reconstruction theory(Article). Jixie Qiangdu/Journal of Mechanical Strength, Vol.40, No.2, pp. 467-471.
[4] Shearer picks holes in England's defence(2014). Sunday Times, p.7.
[5] Dong Yude, Song Zhonghui, Zhang Rongtuan, Bai Sucheng, Zhang Fangliang, Liu Yanchao(2016). Online monitoring of shearer's pick wear based on anfis fuzzy information fusion[J].China Mechanical Engineering,Vol.27, No.19, pp.2607-2614.
[6] Chun Hong Zhang, Ning Zhang, Yue Wang(2013). Heat Treatment Technology and Property Study on 40Cr of Shearer Picks Body. Advanced Materials Research, vol.791-793, pp.782-785.
[7] Ning Zhang, Jin Guo Ge, Li Yang, Min He(2013). Development of Shearer Picks Brazed by Copper Brazing Agent and Property Study on Brazing. Advanced Materials Research, vol.791-793,.710-713.