Welcome to Francis Academic Press

Academic Journal of Engineering and Technology Science, 2020, 3(5); doi: 10.25236/AJETS.2020.030502.

Research on Optimization Method of Substation Location

Author(s)

Xiao Xue, Gao Jing, Zhang Ou, Pan Jin

Corresponding Author:
Xiao Xue
Affiliation(s)

State Grid Liaoning Electric Power CO,LTD. Power Electric Research Institute, Shenyang, Liaoning110015, China

Abstract

The selection and determination of substation sites must be based on in-depth and meticulous investigation and research, and comprehensive consideration should be given to the requirements of load requirements, exit corridors, environmental protection, geology, transportation, etc., so as to select the most reasonable solution.

Keywords

site selection; basic requirements; intelligence; algorithm

Cite This Paper

Xiao Xue, Gao Jing, Zhang Ou, Pan Jin. Research on Optimization Method of Substation Location. Academic Journal of Engineering and Technology Science (2020) Vol. 3 Issue 5: 7-12. https://doi.org/10.25236/AJETS.2020.030502.

References

[1] Wang Chengshan, Wei Haiyang, Xiao Wei, et al. Two-stage optimization planning method for substation site selection and constant volume[J]. Automation of Electric Power Systems, 2005, 29(4): 62-66
[2] Zhang Liying, Fan Tomorrow. Research on distribution network comprehensive planning model and algorithm [J]. Journal of China Electrical Engineering, 2004, 24(6): 59-64
[3] Liu Zifa, Zhang Jianhua.Study on the location and capacity of substation based on improved multi-organized particle population optimization algorithm[J]. Proceedings of the CSEE,2007,27(1):105~111.
[4] Dong Yongfeng, Yang Yanqing, Song Jie, et al. Substation Location Planning Based on Improved Particle Swarm Optimization Algorithm[J]. Relay, 2008, 36(5): 32~35.
[5] Guan Honghao, Tang Wei. Substation Location Method Based on Voronoi Diagram[J]. Power System Protection and Control, 2010, 38(20): 196~200.
[6] Ge Shaoyun, Li Hui, Liu Hong. Substation Optimization Planning Based on Weighted Voronoi Diagram[J]. Automation of Electric Power Systems, 2007, 31(3): 29~34.