Welcome to Francis Academic Press

Academic Journal of Engineering and Technology Science, 2020, 3(5); doi: 10.25236/AJETS.2020.030503.

Research on Programming Failure of PLC Direct Translation Method

Author(s)

Wuxing Duan

Corresponding Author:
Wuxing Duan
Affiliation(s)

Huizhou Technician Institute, Huizhou, Guangdong, China
[email protected]

Abstract

Motor jog failure appears in the process of transforming relay control circuit into PLC ladder diagram with PLC direct translation. Taking the motor jog control system as an example, firstly analyze the root cause of failure according to PLC serial operation that is PLC contact soft component changes state after one scan cycle of its coil soft component. Then design solutions and improve program according to the functions of retention and memory of PLC auxiliary relay. Finally, the feasibility of the solution is verified through the experiment, and good results are achieved. The results supply some guidance for PLC programming in engineering.

Keywords

Auxiliary relay, PLC direct translation, Serial operation, Motor jog

Cite This Paper

Wuxing Duan. Research on Programming Failure of PLC Direct Translation Method. Academic Journal of Engineering and Technology Science (2020) Vol. 3 Issue 5: 13-20. https://doi.org/10.25236/AJETS.2020.030503.

References

[1] Liu Jianqi. Improvement of Communication Method between PLC and MCGS Touch Screen in the Process of Integrated Teaching [J]. China New Telecommunications, 2019, 21 (17): 141-142.
[2] Zhu Kuilin. Application of PLC transplantation design method in the transformation of the original relay contactor control system [J]. Machine Tool & Hydraulics, 2015, 43 (10): 191-194.
[3] Feng Qirong, Zhao Ying. Application of transplantation design method in relay control system transformation [J]. Occupation, 2011 (08): 165-166.
[4] Dong Yong. Application of PLC-based Intelligent Control in the Reform of Boring Machines [D]. Hunan University, 2009.
[5] Xiong Liwei, Dai Hongju, Zhou Hao. Discussion on the problems of transplantation in PLC program [J]. Mechanical Research & Application, 2011, 24 (03): 155-156+160.
[6] Liang Jiangping. Program design of PLC scanning cycle analysis method [J]. China Southern Agricultural Machinery, 2017, 48 (13): 118+121.
[7] Wang Yude, Liu Jingbin, Zhou, Chongbo. The competition question processing in PLC transformation process of relay control system [J]. Industrial Control Computer, 2007 (07): 78-79.
[8] Wang Ning. The role of Auxiliary Relay in MITSUBISHI PLC ladder diagram [J]. Digital Technology &Application, 2018, 36 (03): 6-7.
[9] Liu Xiaofei. Talking about the Application of Internal Auxiliary Relay in PLC Programming [J]. Science and wealth, 2018, (30): 118.