Welcome to Francis Academic Press

International Journal of Frontiers in Engineering Technology, 2021, 3(5); doi: 10.25236/IJFET.2021.030509.

WEB-Based Computer Aided Innovation Design

Author(s)

Honghua Wang 

Corresponding Author:
Honghua Wang
Affiliation(s)

The Department of Computer Sicence and Engineering ,Huaiyin Institute of Technology, Huaian 223003, Jiangsu, China

Abstract

The development of science and technology, the gradual promotion of various new technology tools in various fields, and mechanical design also actively encourage the continuous application of various new technologies. The design provides higher comfort, greatly reduces product design time, and creates higher economic benefits for the enterprise. The application of computer-aided design in mechanical design is briefly discussed. The scheme design of the mechanical system directly determines the function, quality and cost of the product and is the key to product design. At present, the research and application of computer-aided design technology in the design information expression, structural performance analysis and product data management of general mechanical systems are becoming more mature, but the support for scheme design is still relatively weak. Given that computer-aided solution design of mechanical systems often relies on expertise in specific fields, and may require the use of dedicated design models and specific intelligent design methods based on the characteristics of the design problem, most of its research and development work is aimed at specific areas and used for special purpose systems for mechanical systems. Two principles of innovative design ideas are summarized: the shortest path principle and the similarity principle, the current research flaws based on modern proof technology are analyzed, and a combination of genetic algorithms is proposed to solve it. A quantitative method of physical similarity was proposed, and the similarity was used as the basis to combine genetic algorithm with computer-aided and initial population selection to create an improved genetic algorithm. In this paper, a computer-aided innovation design system based on WEB is studied. This article takes automobile cover molds as an object. When the mechanical system workload is 20J, the traditional method consumes 60,000 yuan, and this article consumes 13,000 yuan. When the mechanical system workload is 60J, the traditional time consumed by this method is 50min, and the time consumed by this method is 15min. The working efficiency of the traditional method is 70%, and the working efficiency of this method is 93%.

Keywords

Mechanical Design, Creative Design, Computer Aided, Creative Thinking

Cite This Paper

Honghua Wang. WEB-Based Computer Aided Innovation Design. International Journal of Frontiers in Engineering Technology (2021), Vol. 3, Issue 5: 72-83. https://doi.org/10.25236/IJFET.2021.030509.

References

[1] Kozlov A S , Shmakov N A , Tkalich V L , et al. Development library of finite elements for computer-aided design system of reed sensors[J]. Journal of Physics Conference Series, 2018, 1015(3):032080.

[2] Huang P , Chen Y , Li Y , et al. Shape Acquiring and Editing through an Augmented Reality based Computer-aided Design System[J]. Computer-Aided Design and Applications, 2015, 12(6):1-10.

[3] Yang G , Zhang X . Construction of computer-aided industrial design system based on agility[J]. International Journal of Computing Science and Mathematics, 2015, 6(5):492.

[4] Borisov R K , Zhulikov S S , Koshelev M A , et al. A Computer-Aided Design System for Protecting Substations and Overhead Power Lines from Lightning[J]. Russian Electrical Engineering, 2019, 90(1):86-91.

[6] Nemoto M , Masutani Y , Nomura Y , et al. Machine Learning for Computer-aided Diagnosis[J]. Igaku butsuri: Nihon Igaku Butsuri Gakkai kikanshi = Japanese journal of medical physics: an official journal of Japan Society of Medical Physics, 2016, 36(1):29-34.

[7] Sahoo D P , Nguyen P H , Mukhopadhyay D , et al. A Case of Lightweight PUF Constructions: Cryptanalysis and Machine Learning Attacks[J]. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 2015, 34(8):1334-1343.

[8] M Karcı, Demir N , M G Subaşı, et al. Shear bond strength of a novel porcelain repair system for different computer-aided design/computer-assisted manufacturing ceramic materials[J]. Nigerian journal of clinical practice, 2018, 21(4):507-513.

[9] Ghorbanian V , Salimi A , Lowther D A . A Computer-Aided Design Process for Optimizing the Size of Inverter-Fed Permanent Magnet Motors[J]. IEEE Transactions on Industrial Electronics, 2017, PP(99):1-1.

[10] Yu W , Mackerell A D . Computer-Aided Drug Design Methods[J]. Methods in Molecular Biology, 2015, 1520(2):85.

[11] Du L , Liu C C , Zhang Y , et al. A Single Layer 3D Touch Sensing System for Mobile Devices Application[J]. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 2017, PP(99):1-1.

[12] Wang Y , Li H , Li X . A Case of On-chip Memory Sub-system Design for Low-Power CNN Accelerators[J]. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 2017, PP(99):1-1.

[13] Lee H , Faruque M A A . Run-Time Scheduling Framework for Event-Driven Applications on a GPU-Based Embedded System[J]. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 2016, 35(12):1956-1967.

[14] Pilato C , Mantovani P , Guglielmo G D , et al. System-Level Optimization of Accelerator Local Memory for Heterogeneous Systems-on-Chip[J]. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 2016, PP(99):1-1.

[15] Santos-Mayo L , Jose-Revuelta L M S , Arribas J I . A computer-aided diagnosis system with EEG based on the P3b wave during an auditory odd-ball task in schizophrenia[J]. IEEE Transactions on Biomedical Engineering, 2017, 64(2):395-407.

[16] Pilato C , Mantovani P , Guglielmo G D , et al. System-Level Optimization of Accelerator Local Memory for Heterogeneous Systems-on-Chip[J]. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 2016, PP(99):1-1.

[17] Goeders J , Wilton S . Signal-Tracing Techniques for In-System FPGA Debugging of High-Level Synthesis Circuits[J]. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 2016, 36(1):1-1.

[18] Rakov D L , Sukhorukov R Y , Pecheykina M A . Choosing and Evaluating Fabrication Processes by Means of a Computer-Aided Innovation Support System Based on the Morphological Approach[J]. Journal of Machinery Manufacture and Reliability, 2019, 48(2):173-178.

[19] Gonen D , Oral A , Yosunlukaya M . Computer‐Aided Ergonomic Analysis for Assembly Unit of an Agricultural Device[J]. Human Factors and Ergonomics in Manufacturing & Service Industries, 2016, 26(5):615-626.

[20] Fu H , Wang C , Jin C , et al. Development of digital design software platform AgriDEM for agricultural machinery parts[J]. Transactions of the Chinese Society of Agricultural Engineering, 2017, 33(7):1-9.

[21] Jie Wei, Jigang Wu, Min Meng. Fine-grained Image Classification with Low-dimensional Visual Feature Embedding[J]. Jisuanji Fuzhu Sheji Yu Tuxingxue Xuebao/Journal of Computer-Aided Design and Computer Graphics, 2017, 29(12):2330-2335.

[22] Y. Mei, G. Tan, Z. Liu. Learner's Emotion Prediction in Smart Learning Environment[J]. Jisuanji Fuzhu Sheji Yu Tuxingxue Xuebao/Journal of Computer-Aided Design and Computer Graphics, 2017, 29(2):354-364.

[23] Han Sun, Xi Xia, Ligang Liu. Multi-level Partial Matching Algorithm for Autoscanning of 3D Shape[J]. Jisuanji Fuzhu Sheji Yu Tuxingxue Xuebao/Journal of Computer-Aided Design and Computer Graphics, 2019, 31(1):10.

[24] Anita Aghaie, Mehran Mozaffari Kermani, Reza Azarderakhsh. Reliable and Fault Diagnosis Architectures for Hardware and Software-Efficient Block Cipher KLEIN Benchmarked on FPGA[J]. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 2017, PP(99):1-1.

[25] Ahmed S. Hussein, Anwar H. Jarndal. Reliable Hybrid Small-Signal Modeling of GaN HEMTs Based on Particle-Swarm-Optimization[J]. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 2017, PP(99):1-1.