Academic Journal of Engineering and Technology Science, 2021, 4(5); doi: 10.25236/AJETS.2021.040501.
Tianjin Zhiyuan Blasting Engineering Co., Ltd., Tianjin, China
According to the roadway characteristics and physical properties of rock, calculation model of FLAC2D established, analyzes strain and stress distribution of roadway surrounding rock under static condition and dynamic load of blasting. The results show that, by blasting dynamic loads, stress of surrounding rock will be redistribute, cause displacement increased, and vertical displacement larger than lateral displacement; with the decrease of rock bolt spacing, stress and displacement of surrounding rock under blasting dynamic load decreases, and when the distance is less than a certain value, the influence of blasting dynamic load is smaller. Combined with the results of numerical analysis, gained reasonable supporting parameters, and applied to the engineering practice, has obtained good supporting effect.
Roadway, Blasting dynamic load, Bolt, Supporting effect
Bin Hu. Research on Roadway Supporting Effect of Different Bolt Parameters under Blasting Dynamic Load. Academic Journal of Engineering and Technology Science (2021) Vol. 4, Issue 5: 1-5. https://doi.org/10.25236/AJETS.2021.040501.
 Cui C.S. (2009) Popularization and Application of Deep-hole Blasting Technique in Bottom Compound-term Wedge Cutting. Chinese Coal, 35(5): 59-60.
 Han B, Ma Q.Y. (2013) Research on Testing and Controlling Techniques of Millisecond Delay Blasting Vibration in Coal Mine Rock Roadway. Journal of China Coal Society, 38(2): 209-214.
 Huang Q.M., Feng X.Y., Zhao W. (2014) Application of rapid heading technology with deep borehole blasting in mine large cross section rock roadway. Coal Engineering, 2: 28-30.
 Jiang N., Zheng X.S., Zhang L., et al. (2010) Numerical simulation study about the effect of mining blasting vibration on tunnel surrounding rock. Engineering Blasting, 16(3): 21-24.
 Liu B., Han Y.H. (2005) FLAC principle, instance and application guide. China Communications Press, Beijing.
 Yang G.L., Yang R.S., Che Y.L. (2013) Damage accumulative effect of surrounding rock under periodic blasting vibration. Journal of China Coal Society, 38(S1): 25-29.
 Cheng B., Wang H.B., Zong Q., et al. (2010) Application research on cutting technology of mid-deep hole blasting in coal mine rock tunnel. 27(4): 35-39.
 Zong Q., Wang H.B., Xu Y., et al. (2013) Analysis of blasting seismic wave signal in coalmine roadway excavation based on HHT method. Vibration and Shock, 32(15): 116-120.