In this study, the chemical method was used to treat electroplating wastewater by chemical method and biological method, and the hydrogen-catalytic oxidation method was used for pretreatment of cyanide wastewater. For the selection of adsorbent materials containing lead wastewater pretreatment, the method of using a single factor experiment exploits the amount of investment, initial concentration, adsorption time on the adsorption amount and the adsorption rate, and the results showed that when the dosage was 0.5 g·L-1, the adsorption rate of platycladus orientalis bark to Pb2+ was 88.41%,which was the highest compared with other adsorption materials; when the initial concentration is large, the lateral cerridge maintains a high adsorption amount and reaches 51.39 mg·g-1. This value is significantly higher than other materials that have been reported, such as constituents, walnuts, etc. The adsorption time reaches the adsorption balance after 30 min. The platycladus orientalis bark exhibits the best adsorption in the end.

Yu Zou. The Method of Electroplating Wastewater Treatment and the Comparison of Adsorption Materials. Academic Journal of Environment & Earth Science (2022) Vol. 4 Issue 5: 20-24. https://doi.org/10.25236/AJEE.2022.040504.

[1] Li Y, sun M M, Meng X L, et al. Study on biological treatment of zinc nickel alloy electroplating wastewater [J] Water treatment technology, 2020,46 (2): 84-88.

[2] Zhou R Z, Xie J W, Dai Z P, et al. Design and operation of electroplating wastewater treatment engineering [J] Electroplating and finishing, 2020,39 (23): 1687-1693.

[3] Chen J H. Analysis of engineering design example of zero discharge of electroplating wastewater [J] Comprehensive utilization of resources in China, 2021, 39 (3): 167-169.

[4] Liu P Y, Wang X Q, Chang Q, et al. Feasibility study on removal of hexavalent chromium from wastewater by aluminum carbon micro electrolysis [J] China Environmental Science, 2019,39 (10): 4164-4172.

[5] Li X, Wu Y Q, Zhang G Q, et al. New progress in copper containing wastewater treatment and resource utilization technology [J] Environmental Science and technology, 2018,41 (8): 34-40.

[6] Tan X Y, Li B, Li P, et al. Preparation and removal of CD (Ⅱ) by nano hydroxyl iron modified cationic resin [J] Water treatment technology, 2019,45 (6): 56-60.

[7] Zhang C J. Engineering design and operation of a mine leaching wastewater treatment plant in Anhui [J] China water supply and drainage, 2020, 36 (10): 108-112.

[8] Tang C C, Xu R M. Research progress of chemical manganese removal technology [J] Water treatment technology, 2018,44 (12): 14-19.

[9] Li Y, sun M M, Meng X L, et al. Study on biological treatment of zinc nickel alloy electroplating wastewater [J] Water treatment technology, 2020,46 (2): 84-88.

[10] Leticia A B M, Xochitl O L, Gabriela G G A, et al. Kinetic study and numerical validation of the cyanide neutralization process using alkaline chlorination[J]. ECS Transactions,2021,101(1):383-392.

[11] Xie X, Luo W W, Wang N, et al. Study on Pb (Ⅱ) adsorption characteristics of montmorillonite rice husk carbon composites [J] Journal of Agricultural Environmental Sciences, 2018,37 (11): 2578-2585.

[12] Lei Q, Li H F, Chang L, et al. Amination/oxidization dual-modification of waste ginkgo shells as bio-adsorbents for copper ion removal[J]. Journal of Cleaner Production,2019,228:112-123.

[13] Chen F, Zhang M, Zhu Y, et al. Adsorption characteristics and mechanism of boron doped micro mesoporous carbon spheres for cadmium [J] Journal of ecological environment, 2019,28 (6): 1193-1200.

[14] Xiao F F, Zhang Y Y, Cheng J H, et al. Adsorption properties of chitosan / magnetic biochar for heavy metal Cu (Ⅱ) [J] Journal of environmental engineering, 2019,13 (5): 1048-1055.

[15] Wang M L, Wang C, Li Y M. Effect of initial pH value on positive osmosis concentration of municipal wastewater and phosphorus recovery [J] China Environmental Science, 2021,41 (2): 660-668.