Designing an emulsified matrix formulation in the laboratory, the ratios of the emulsifier span-80 and T-152 were 1:0, 2:1, 1:2, 0:1 respectively. Then the preparation was added by 0.04% Fe2+ impurities emulsion matrix. Based on the water-soluble test method, we used ultrasonic instrument to focus on emulsion matrix containing Fe2+ impurities. The results show that the crystallization amount of emulsion matrix by adding Fe2+ is more than that of not adding Fe2+ .Impurities Fe2+ has damaging effects on the stability of its interface membrane. At the same time, ultrasound can accelerate the speed of demulsification of emulsion matrix. As composite emulsifiers span-80: T-152=1:2, the stability of emulsion matrix is the best.

Fan Yang. Rapid Prediction of Effect of Ferrous Iron on the Stability of Emulsion Explosives Matrix. Academic Journal of Engineering and Technology Science (2022) Vol. 5, Issue 11: 39-43. https://doi.org/10.25236/AJETS.2022.051106.

[1] Lou, Z.X., Wang, H.X., Zhang, M., et al. Improved extraction of oil from chickpea under ultrasound in a dynamic system [J]. Food Eng, 2010, 98: 13-18．

[2] Feng R. Ultrasonic Manual [M]. Nanjing: Nanjing University Press, 1999: 90-91.

[3] WangX G. Emulsion Explosives [M]. Beijing: Ordnance Industry Press, 2008．

[4] Hu, K.L, Diao, X.P., Tang, Z.J., et al．Experimental investigation on the ultrasonic characterization method for interfacial film properties of emulsion explosive matrix [J]. Initiators & Pyrotechnics, 2012(4): 36-39.

[5] Yang, F., Yao, D., Cao, Y., et al. Experimental investigation on the ultrasonic measurement method to evaluate the stability of emulsion explosive matrix [J]. Initiators & Pyrotechnics, 2015(1): 45-48.