In hydraulic cylinder systems, oil pollution results in wear and leakage of hydraulic cylinder components. In accordance with the actual working conditions of a certain type of hydraulic cylinder, the technology of fluid–solid thermal coupling and multiphase flow analysis is applied to analyze the heat–fluid–solid coupling of hydraulic cylinder under the condition of particle polluted by hydraulic oil. The distribution law of the heat field of hydraulic cylinder was obtained through analysis. The results show the effect of heat flow on the partial load effect. The distribution rules of particles in the hydraulic cylinder were obtained under the influence of different gaps and particle pollutants. The damage rate of the hydraulic cylinder under these working conditions was analyzed by optimizing the plunger and cylinder clearance fit and providing important technical support to solve the problem of hydraulic oil leakage in hydraulic cylinders.

Su Zehui, Du Honge. Clearance Fit Design of a Hydraulic Cylinder with Particle Polluted by Hydraulic Oil. Academic Journal of Engineering and Technology Science (2022) Vol. 5, Issue 12: 11-17. https://doi.org/10.25236/AJETS.2022.051202.

[1] Peng, Z; Xinyuan, C; Zhiwen, C. Leakage detection based on CEEMDAN analysis for hydraulic cylinder using acoustic emission technique. Journal of Physics: Conference Series, 2022, 2166(1).

[2] Fung, W-K; Karnik, A. Recent advances in pipeline monitoring and oil leakage detection technologies. Principles and Approaches, 2019, 19(11), pp. 2548-2548.

[3] Guo, Y; Xiong, G; Zeng, L; Li, Q. Modeling and predictive analysis of small internal leakage of hydraulic cylinder based on neural network. Energies, 2021, 14(9), pp. 2456.

[4] Chang, J. Field diagnosis and treatment of common faults in hydraulic system. New technology and new process, 2013, 33(5), pp. 102-105. 

[5] Xu, Y; Zhao, Y. Force comparison and analysis of main movement mechanism of three forging machines. Journal of Machine Design, 2012, 29(7), pp. 38-42. 

[6] Gao, J; Sun, M; Lu, G; et al. Dynamic load factor analysis for high-speed forging hydraulic press. Forging and Stamping Technology, 2012, 37(6), pp. 57-60. 

[7] Liu, X; Ye, W. Structural design and operation characteristics analysis of hydraulic cylinder. Hydraulics Pneumatics and Seals, 2013, 33(7), pp. 17-21. 

[8] Liu, Y; Yang, J. Mechanical analysis of ball hinge in working cylinder of double-column forging hydraulic press. Mechanical Science and Technology, 2014, 33(06), pp. 789-791.

[9] Zhao, C; Yang, S; Liu, P, et al. Principle and theoretical research on the balance system of large die forging hydraulic press. Journal of Mechanical Engineering, 2012, 48(10), pp. 82-89. 

[10] Zhao, C; Li, W; Zhou, W, et al. Mechanical and mechanical analysis of spherical bearing of hydraulic plunger. Heavy Machinery, 1996, 23(4), pp. 15-18.

[11] Chang, J. Field diagnosis and treatment of common faults in hydraulic system. New technology and new process, 2013, 33(5), pp. 102-105.

[12] Han, Y; Wen, X; Wang, B. Finite element analysis and optimization of hydraulic cylinder based on ANSYS. Coal Mine Machinery, 2011, 32(09), pp. 94-96.

[13] Hu, X. Fatigue life analysis of hydraulic cylinder based on Workbench. Coal Mine Machinery, 2013, 34(6), pp. 94-95.

[14] Wang, L; Du, R; Wu, B, et al. Dynamic analysis of low-speed motion of hydraulic cylinder. China Mechanical Engineering, 2006, 17(20), pp. 2098-2101. 

[15] Yang, G. Nonlinear finite element analysis and optimization of hydraulic cylinder enduring axial loads and radial loads. Coal Mine Machinery, 2009, 30(11), pp. 84-85.

[16] Zhang, H; Feng, S; Yang, L. The simulation analysis on pressure characteristics of internal leakage in hydraulic system of heavy vehicles. IOP Conference Series. Earth and Environmental Science, 2021, 719(4).

[17] Zhang, R; Hu, T; Yang, J. numerical study on flow field in plunger type hydraulic cylinder. Hydraulics Pneumatics and Seals, 2015, 35(11), pp. 9-13.