Welcome to Francis Academic Press

International Journal of Frontiers in Engineering Technology, 2022, 4(10); doi: 10.25236/IJFET.2022.041008.

Anti-vibration Measures of Ultrahigh Strength Steel Cored Aluminum Strand for Long-Span Overhead Line

Author(s)

Xuesong Zhang, Haijun Niu, Shengchun Liu, Yi Qi

Corresponding Author:
​Xuesong Zhang
Affiliation(s)

China Electric Power Research Institute, Xicheng District, Beijing, 100055, China

Abstract

It is the key issue for long-span overhead line to take anti-vibration measures for the ultrahigh strength steel cored aluminum strand. Taking the ultrahigh strength steel cored aluminum strand JLHA1/G6A-500/230 as the example, the aeolian vibration control measure for ultrahigh strength steel cored aluminum strand is tested based on the balance principle of conductor aeolian vibration. The result shows that the dynamic bending strain of the conductors exceeds120×l0-6 when the test frequencies are in the range of 14Hz~70 Hz. In order to reduce the dynamic bending strain of the conductors, the anti-vibration measure of the β damping wires combined with vibration dampers is used. The β damping wires have very good energy dissipation capacity within wide frequencies. The layout of the damping wires is designed as combinations of 3.8 m , 3.2 m, 2.7 m...0.9msingle lace damping lines respectively, two vibration dampers are arranged in the mid span of the first and second damping wires. After taking the anti-vibration measure, the maximum dynamic bending strains of the conductors is controlled below 120×l0-6, which meet the standard requirements. This study provides useful reference for long-span overhead line.

Keywords

aeolian vibration, anti-vibration measure, β damping wire, vibration damper

Cite This Paper

Xuesong Zhang, Haijun Niu, Shengchun Liu, Yi Qi. Anti-vibration Measures of Ultrahigh Strength Steel Cored Aluminum Strand for Long-Span Overhead Line. International Journal of Frontiers in Engineering Technology (2022), Vol. 4, Issue 10: 47-50. https://doi.org/10.25236/IJFET.2022.041008.

References

[1] Y.Q.Zheng. Aeolian vibration of power transmission conductor [M]. Beijing: China Water Power Press, 1987.

[2] T.X. Shao. Mechanical computation of power transmission conductor [M]. 2nd ed. Beijing: China Power Press, 2003, pp.312-354. 

[3] F. Wang, Y. Wang, R Zhou,et al. Experiments on aeolian vibration of large span overhead transmission lines [J]. Journal of Chongqing University, 2018,41, pp. 42-50.

[4] Q.Li ,H.M.Fang ,Y.Zhang ,et al.Study on wind-induced power of overhead transmission wire under self-damping conditions [J].China Electric Power, 2016, 49, pp. 38-41.

[5] L.Li, C.Yuankun, Y. Zhixiong, et al. Indoor simulation tests for overhead transmission line [J]xcvbnmjkl;,Journal of Huazhong University of Science and Technology:Natural Science Edition, 2010, 38, pp.99-102. 

[6] IEEE Std 664. IEEE Guide for Laboratory Measurement of The Power Dissipation Characteristics of Aeolian Vibration for Single Conductors[S], 1993.

[7] N.G. Xu, J.C Wang. Conductor self damping measurement and a practical calculating method [J]. China Power, 1995, 28,pp. 17-20. 

[8] N.G. Xu, J.C Wang. Measurement and practical calculation of wire self-damping [J].China Electric Power,1994, 15, pp.2-5.